IPD Products News

  • 21 November 2012
    Insulated Busbars
  • 01 October 2012
    CDS6U-KIT3P - The metering disconnect & test terminal block is designed to allow complete testing and verification of kilowatt hour (kWh) meters with CT connections. Disconnection of a meter is possible without load interruption or complete installation shutdown. Measurement checks and comparison measurements are possible using this test terminal block.
  • 01 June 2012
    Elsteel Complies With REACH Regulations
  • 21 May 2012
    Techno GL Approvals
  • 10 May 2012
    The Socomec range of 3 in 1 current transformers from IPD combine three traditional current transformers in one moulded case.
  • 10 May 2012
    IPD Industrial Products New TCA & TCB current transformers from Socomec.
  • 27 April 2012
    IPD Industrial Products has secured a major order for its “Vulcan” trefoil cleats and new “FlexiStrap” short circuit straps to be installed in the NEXT Data Centre in Melbourne.
  • 27 April 2012
    IPD has secured a major order from Leighton Contractors for supply of Ellis’ “ProTect” retention strap for underground cable installation at Barrow Island in the Gorgon LNG Project in Western Australia.
  • 02 Feburary 2012
    The Elsteel TECHNO Modular System is probably the leading modular switchboard system in Australia today.
  • 01 December 2011
    Elsteel’s popular TECHNO Modular Switchboard System continues to make rapid progress with the introduction of the new style Fully Withdrawable cell.
  • 05 September 2011
    Elsteel has passed the final approvals related to the marine industry by securing GL Germanischer Lloyd approvals for Techno Module. With this approval, Techno is the only modular system in the world that has all 6 approvals related to the marine industry...
  • 28 June 2011
    DGS275 DEHN Power Supply Systems - Single pole surge arrestor class II 275VAC
  • 28 June 2011
    Class II DEHN Power Supply Systems - Modular surge arrester with integrated backup fuses for IT and TN-S systems ('3+1" circuits)
  • 09 May 2011
    Mild Steel Enclosures
  • 09 May 2011
    Stainless Steel Enclosures
  • 09 May 2011
    Sloping Roof Stainless Steel Enclosures
  • 09 May 2011
    Terminal Boxes
  • 06 May 2011
    IPD Industrial Products and Elsteel had significant successes recently with testing the Elsteel TECHNO Modular System for Internal Arcing Fault Containment at 690V.
  • 06 May 2011
    IPD Industrial Products now have a new range of Flexible Copper Braids from Elsteel - “FLEXIBARS” that are available from stock.
  • 06 May 2011
    IPD’s range of Elsteel mild steel and stainless steel enclosures has expanded.
  • 18 April 2011
    ELLIS PATENTS gains Global Approvals
  • 15 Feburary 2011
    Press Release - New Telergon DC 1000V Isolators
  • 09 September 2010
    Emergency Lighting Test Switch
  • 08 September 2010
    Ellis Patents reinforced its growing reputation on the world stage during the recent 2010 CIGRE (International Council on Large Electric Systems) Session in Paris.
  • 03 August 2010
    Ellis Patents 17 Series CableClamp Launch
  • 06 July 2010
    Ellis Patents has agreed a deal with one of the world’s leading cable manufacturers, Ducab to become its sole supplier of cable cleats.
  • 16 June 2010
    Ellis Patents has received London Underground (LUL) approval for six of its product ranges.
  • 30 May 2010
    Ellis Patents has launched a range of fire proof cable cleats designed specifically for installation with fire protection (FP) rated cables.
  • 10 May 2010
    Ellis Patents has launched a basket tray clip that provides a strong and reliable means of securing cables with high fault levels to the increasingly popular cable management solution when used in conjunction with its heavy duty trefoil cleats.
  • 01 March 2010
    Terminal blocks are a device that end users often take for granted. They have been around for years and the general opinion is that they require no more than one wire in and one wire out. The new terminal blocks from Connectwell allow three wire or four wires to be connected to a single 6 mm wide terminal with up to 2.5 sq mm wire size.Available in Double level and Triple level blocks the terminals from Connectwell are designed to simplify and reduce wiring time and space.
  • 24 Feburary 2010
    IPD has expanded the available range of options in the enclosed active and neutral links from 100A to 840A in a variety of connection options.
  • 24 Feburary 2010
    The new energy management capabilities brochure covers updated Socomec digital metering products ranging from single phase check meters through to mutli-function measurement & analysis meters.
  • 18 November 2009
    Click here to download the pdf information sheet.
  • 03 September 2009
    Elsteel together with IPD Industrial Products achieved significant successes in their quest to provide the Australian Switchboard Building industry with what we now believe is possibly the most tested system available in the market.
  • 16 August 2009
    Cable cleats are designed to fix, retain and support cables. In addition, where short-circuit faults are anticipated, correct cleating will result in the containment of the cables during a fault and enable the circuit to be restored once the fault has been repaired.
  • 10 June 2009
    New! Spring Loaded ‘Safety’ Terminal blocks from Connectwell. If accidently, the screw clamp is not tightened the spring acts as a layer of safety, ensuring that the connection is maintained by means of spring tension. Rated for 1000V applications.
  • 06 May 2009
    Degrees of Protection in Enclosures
  • 05 May 2009
    Triplex cable poses some difficulties for installers where the cable is not buried but needs to be properly cleated.
  • 05 May 2009
    Dwindling fossil fuel reserves and tax incentives on solar technology - see how Ferraz Shawmut can protect your solar network.
  • 09 March 2009
    Benifits of Thermoplastic Enclosures in Electrical Installations
  • 04 Feburary 2009
    IDEC has now released a new 5.7” Touch Screen in HG series part number HG2G. This series offers a HMI with Ethernet interface in either a Monochrome LCD or a Color LCD with a light gray bezel.
  • 06 Janurary 2009
    In today's, high-tech world control panels will progressively reduce in size, forcing us to do a lot more in a lot less space. With a pitch of just 6 mm the 1C/O Slim Relay Module is the most compact Relay Module available and the right solution to such problems.
  • 23 December 2008
    BS 88 fuse link and fuse base cross reference guide
  • 23 December 2008
    With the growing demand for alternate power systems with voltages up to 1,000V Jean Muller has produced a range of DIN fuse links and Disconnectors suitable up to 1,200V AC and 1,000V DC
  • 23 December 2008
    All new metal enclosed switches from C&S
  • 23 December 2008
    All new compact changeover switches with DIN rail mounting from Technoelectric in Italy
  • 22 December 2008
    Ferraz Shawmut LIMITOR range of MV fuse links are the ideal fuse for the protection of distribution transformers as well as MV distribution networks.
  • 22 December 2008
    With the introduction of the new AS3000-2007 wiring regulations, greater care needs to be taken when designing switchboards to meet these requirements and provide the enhanced level of safety.
  • 10 December 2008
    The new Power Terminal Block for 16-35 sq.mm cable provides enhanced levels of phase isolation by means barrier type construction. The Stud Type, finger safe termination ensures connection and human safety.
  • 08 December 2008
    IDEC Australia is pleased to announce the release and stock availability of the new generation SmartRelay, part number series FL1E.
  • 13 November 2008
    Introducing the new Hinge Type ‘Finger Safe’ Stud Terminal. Innovative design features makes this terminal simple to install, test and use.
  • 02 October 2008
    Join the 'Winning Choice'. Connectwell offers another connecting aid to suit your demands.
  • 02 October 2008
    32 I/O interface modules for ALLEN BRADLEY SLC 500 Programmable Logic Controllers (PLC)
  • 18 September 2008
    New Interface Modules to ease PLC wiring in CNC Machines
  • 10 September 2008
    IPD distributes the Fandis range of enclosure ventilation, heating and lighting equipment.
  • 14 August 2008
    Another innovative design terminal from Connectwell.
  • 06 August 2008
    DDFL4U series terminal block is a space saving design especially in PLC control wiring applications
  • 24 July 2008
    Switching Modules with solid state relays
  • 06 June 2008
    Terminal Blocks from Connectwell
  • 28 May 2008
    IPD Industrial Products is now stocking the GE range of Redline? Times Switches known as the Classic (Analogue) and Galax (Digital) the range covers Daily, weekly, Daily/weekly Timers, both with or without running reserve.
  • 28 May 2008
    IPD Industrial Products is the exclusive Australian distributor for ELKO products.
  • 28 May 2008
    IPD’s TECHNO Instant Panel system that is part of the TECHNO Modular Switchboard system is ideally suited for Mechanical Services applications to build medium to large sized control, distribution panels, lighting panels etc.
  • 28 May 2008
    IPD is pleased to re-introduce the popular GE range of APO Modular Polyester Boxes to the Australian Market.
  • 28 May 2008
    The SOCOMEC multi-function power meter from IPD Industrial Products offers a universal solution for measurement and control of energy management systems.
  • 28 May 2008
    IPD Industrial Products now have an enclosure designed specifically for Home and Building Automation Systems. The
  • 28 May 2008
    Two styles of GE manual motor starters are now available from IPD Industrial Products.
  • 28 May 2008
    The new spring clamp terminals from IPD Industrial Products are suitable for all types of wire ranging from 0.5 – 10mm2. The compact feed through terminal provides more versatility for all your wire termination needs.
  • 28 May 2008
    Enclosure Systems used in most applications especially in the industrial & infrastructure areas are exposed to special stresses.
  • 28 May 2008
    IPD Industrial Products has released the new Contax Kilowatt hour meters – (Check meters) from ORBIS.
  • 26 May 2008
    IPD Industrial Products has just released the compact NH000 size disconnect that mounts directly onto a 60mm busbar system. The unit is only 63mm in width and represents a 40% space saving over the standard NH00 size disconnect. The reduced width allows for smaller installations and thus reduced cost. The unit utilises the NH DIN fuse in the 000 size from 6A to 100A. The load side terminal clamp can take up to 50mm2 cable. The busbar size for line side connection can be up to 30*10mm. The LTL000BB is available now.
  • 26 May 2008
    IPD Industrial Products has now introduced the new Record Plus Moulded Case Circuit Breaker range from GE with ratings from 16 to 1600A, 22 to 150kA.
  • 26 May 2008
    The extensive range of reliable GE contactors and overloads from IPD Industrial Products are available in 3pole AC3 2.2 to 450kW (6-825A) or 4 Pole 4N/O AC-1 20A to 1250A.
  • 26 May 2008
    IPD Industrial Products has been stocking and supplying the Elsteel TECHNO Modular Switchboard System to Australian and New Zealand switchboard builders for many years.
  • 26 May 2008
    IPD’s new range of Elsteel Mild Steel enclosures has many improvements over the previous range including an increased degree of protection to IP65 and a high quality powder coated ripple finish which is durable and UV resistant.
  • 26 May 2008
    IPD is pleased to introduce the new range of Elsteel’s Stainless Steel enclosures to the Australian market. The new range has some improvements over the previous range including concealed hinges, certification to IP66 and is UL approved.
  • 26 May 2008
    IPD Industrial Products would like to introduce the GT25 series of miniature circuit breaker by GE. The GT25 series features a fault level up to 50kA.
  • 26 May 2008
    Since the introduction of dedicated GPO’s for computer systems, there has been an ongoing battle with “Nuisance Tripping”.
  • 10 Janurary 2008
    All Connectwell terminals are ROHS compliant
  • 04 Janurary 2007
    Automatic transfer switches (ATS) using GE moulded case circuit breakers (MCCB) has finally been made into a true plug and play system. IPD Industrial Products now has one of the most user friendly transfer switches in the market.
  • 04 Janurary 2007
    IPD have engineered a product which incorporates all of the benefits of an Elsteel enclosure into a Distribution Board.
  • Head Office Sales IPD Group limited ABN 12 111 178 351
    web design sydney
    25 Princes Road, PO Box 22 P (02) 9645 0777 P 1300 556 601
    Regents Park, NSW 2143 F (02) 9645 1608 F 1300 550 187