LATEST FEATURED PRODUCTS

• 

• • #64 Low voltage sealing tapes

    more info
    Quick void-free insulation build-up, moisture, dust and corrosion protection

  • "Phoenix" Fire Rated S/S Cable Clamps

    more info
    Successfully tested for fire resistance to BS8491:2008 and BS 5839-1:2002, Section 26.2d, and to 60kA peak @0.1 sec to IEC 61914:2009. Manufactured from 316L marine grade stainless steel.

  • DIN Fixed Padlocking

    more info
    Fixed padlocking device for all GE DIN switchgear and associated products. Universal mounting (left or right) and universal fit of all DIN equipment by GE.

  • COUNTIS E50/53 METER

    more info
    The COUNTIS E50/53 energy meter with CT inputs measures active and reactive power in total or partial mode. It is equipped with a large backlit LCD display for meter configuration and information display. The meter is able to display kWh, kVarh, kVah, instantaneous powers (P, Q and S), currents and voltages. It also calculates the power factor over 4 quadrants and features a connection test and correction function. Meter is available with Pulse output or with RS485 JBUS/MODBUS communications.

  • DEHNrail M 3 Phase Series/Parallel

    more info
    For FINAL SUBCIRCUITS, such as UPS and VSDs. Due to the design this product can be used downstream of Earth leakage protection devices as it is guaranteed no leakage current. T3 protection for a three phase subcircuits (4 wire + Ea) system. Maximum full load current when used in series is 25A.

  • "Emperor" Stainless Steel Cable Cleats

    more info
    'Emperor' stainless steel cable cleats will fit cables outside diameters from 23mm to 155mm in single, trefoil and quad cable applications. They are tested to 235kV peak @ 0.1sec fault current. Make from 316L marine grade stainless steel and LSF low smoke zero halogen polymeric liner.

  • Emergency Lighting Test Switch - Enclosed type

    more info
    The ELTSK4 emergency lighting test switch allows manual testing of single point emergency lighting systems by simulating a timed supply circuit failure. This test switch is designed for stand alone use and allows four emergency lighting circuits to be wired through a normally closed contactor.

  • #222, #233 & #235 Low voltage PVC electrical tapes

    more info
    Black and colour coding, self-adhesive, cold and weather resistant.

  • DDCE60 Series

    more info
    NEW!!! Domestic safety switch by GE in the contractor range of products is a 6kA RCD with Overcurrent and short circuit protection in the size of a standard MCB. The device fits special twin PIN buscomb and other accessories making it convenient and easy to use. But most importantly it is manufactured in Europe and warranted by a global manufacturer.

  • EXFS - Explosion Hazard areas

    more info
    ATEX-certified isolating spark gap for lightning equipotential bonding according to IEC 62305 with low sparkover voltage

  • Surge protection - IT Networks

    more info
    DEHN's Combined lightning current and surge arrester is capable of carrying lightning currents up to 10 kA (10/350 µs) and Low voltage protection level, it is also suited for the protection of terminal equipment for use in conformity with the lightning protection zones concept at the boundaries from 0A – 2 and higher.
•